ArcVision Technology ARC-19509 Manual de usuario descargar pdf (Pagina 13)

ARC-19509

ArcVision Technology Corp.

8.5 VCR SET UP

On the main menu select ”VCR SET UP”, and press <ENTER> to enter the menu of Figure 8-8.

Figure 8-8

8.5.1 RECORDING TIME

The multiplexer supports synchronous and asynchronous mode for VCR.

Synchronous mode:

To operate this mode, the recording time must be set to “SYNC” and the signals to “TRIGGER OUT” and “GND”, the VCR must

be connected to the multiplexer. Using synchronous mode is recommended, if your VCR supports this function.

Asynchronous mode:

The multiplexer supports 2 hours (2H), 12 hours (12H), 24 hours (24H), 24hours real motion (24RH), 48 hours (48H),

72 hours (72H), 120 hours (120H), 168 hours (168H), 240 hours (240H), 480 hours (480H), 720 hours (720H), 960 hours (960H).

User must set the time to “2H”, when it is not a time lapse VCR.

8.5.2 RECORDING TYPE

Recording type can be set to “FIELD” (field by field) or “FRAME” (frame by frame). It is only effective when the recording time is

set to “2H”.

8.6 ALARM PROCESSOR

On the main menu select “ALARM PROCESSOR”, and press <ENTER> to enter the menu of figure 8-9.

VCR SET UP ▊▊

-----------------------------

RECORDING TIME:24RH

RECORDING TYPE:FRAME

ALARM PROCESSOR ▊▊

-----------------------------

▊ALARM 1,2,3 CONFIGURE

▊ALARM 4

6 CONFIGURE

▊ALARM 7,8,9 CONFIGURE

▊VIDEO LOSS CONFIGURE

▊MOTION SET UP

ALARM DURATION 01 MIN

ALARM LIST NO

ALARM FULL SCREEN NO

ANY KEY TO STOP YES

SHOW ALARM LIST

CLEAR ALARM LIST

ALARM 1,2,3 CONFIGURE ▊▊▊

-----------------------------

ALARM 1

SENSOR ENABLE:YES

SENSOR TYPE :N.O.

BUZZER ENABLE:YES

ALARM OUTPUT :YES

ALARM 2

SENSOR ENABLE:YES

SENSOR TYPE :N.O.

BUZZER ENABLE:YES

ALARM OUTPUT :YES

ALARM 3

SENSOR ENABLE:YES

SENSOR TYPE :N.O.

BUZZER ENABLE:YES

ALARM OUTPUT :YES

1 2 ... 8 9 10 11 12 13 14 15 16 17

Comentarios a estos manuales

Sin comentarios

ArcVision Technology ARC-19509 Manual de usuario Pagina 13

Comentarios a estos manuales