ArcVision Technology ARC-19509 Manual de usuario descargar pdf (Pagina 14)

ARC-19509

ArcVision Technology Corp.

Figure 8-9 Figure 8-10

8.6.1 ALARM 1,2,3 CONFIGURE

On the menu of Figure 8-9 select “ALARM 1,2,3 CONFIGURE”, and press <ENTER> to enter the menu of Figure 8-10.

8.6.1.1 SENSOR ENABLE

Set on “YES” to enable the sensor detection.

Set on “NO” to ignore the sensor.

8.6.1.2 SENSOR TYPE

Set on “N.C.” for normal-close sensor, “N.O.” for normal-open sensor.

8.6.1.3 BUZZER ENABLE

Set on “YES” to turn the internal buzzer on when a valid alarm occurs.

Set on “NO” to keep the buzzer to mute.

8.6.1.4 ALARM OUTPUT

Set on “YES” to turn the relay on if a valid alarm occurs.

Set on “NO” to keep relay to the current state.

8.6.2 VIDEO LOSS CONFIG

On the manual of Figure 8-9, select “VIDEO LOSS CONFIG”, press <ENTER> key to enter next menu of Figure 8-11

Figure 8-11

8.6.2.1 DETECTION ENABLE

Set on “YES” to detect video loss and “NO” to disable video loss detection.

8.6.2.2 BUZZER ENABLE

Set on “YES” to turn the internal buzzer on if a valid video loss occurs.

Set on “NO” to keep the buzzer to mute.

8.6.2.3 ALARM OUTPUT

Set on “YES” to turn the relay on if a valid video loss occurs.

Set on “NO” to keep relay to the current state.

VIDEO LOSS CONFIGURE ▊▊

-----------------------------

DETECT ENABLE:YES

BUZZER ENABLE:YES

ALARM OUTPUT :YES

1 2 ... 9 10 11 12 13 14 15 16 17

Sin comentarios

ArcVision Technology ARC-19509 Manual de usuario Pagina 14