ArcVision Technology ARC-19509 Manual de usuario descargar pdf (Pagina 4)

ARC-19509

ArcVision Technology Corp.

3. Installation

Back Panel

3.1 Power Supply

DC 12V ±10%, 830mA, DC 12V/1A switching mode power adapter is recommended.

3.2 ALARM I/O

There is a DB15 connector on the left side of the back panel, which is connected to the external alarm sensor and time lapse VCR

trigger input.

GND Ground

2 ALARM IN-1 External alarm input 1

3 ALARM IN-2 External alarm input 2

4 ALARM IN-3 External alarm input 3

5 ALARM IN-4 External alarm input 4

6 ALARM IN-5 External alarm input 5

7 ALARM IN-6 External alarm input 6

8 ALARM IN-7 External alarm input 7

9 GND Ground

REC TRIG External recoder trigger input

11 RELAY OUT-COM Relay output COM terminal

12 RELAY OUT-N.C. Relay output normal close terminal

13 RELAY OUT-N.O. Relay output normal open terminal

14 ALARM IN-9 External alarm input 9

15 ALARM IN-8 External alarm input 8

3.3 REC TRIGGER INPUT PORT

REC trigger input port is on the right side of the DB15. It is for VCR/DVR trigger signal input.

3.4 VIDEO OUT

3.4.1 MONITOR OUT

Connect the BNC connector for “MONITOR OUT” on the Mutiplexer and the other part to “VIDEO IN” on the Monitor.

3.4.2 CALL OUT

Connect the BNC connector for “CALL OUT” on the Mutiplexer and the other part to “VIDEO IN” on another Monitor.

3.4.3 REC OUT

Connect BNC connector for “REC OUT” on the Multiplexer and the other part to “VCR IN” on the VCR.

3.5 REC IN

Connect the BNC connector for “REC IN” to the VCR for “VIDEO OUT” on the VCR.

3.6 VIDEO IN & LOOP OUT

The camera line is connected to Camera-Video IN and the nine-channel loop-out path is supplied for alternative usage.

ALARM

1 2 3 4 5 6 7 8 9 ... 16 17

Sin comentarios

ArcVision Technology ARC-19509 Manual de usuario Pagina 4